Product Overview
Wire Mesh Reinforced Rubber Gasket combines an elastomer sealing layer with embedded metal mesh to improve dimensional stability and resistance to extrusion.
The reinforcement helps the gasket hold shape under clamping, but pressure and temperature capability depend on rubber type, mesh construction, thickness, flange condition and bolt load.
Specify the rubber compound, mesh metal and opening, total thickness, pressure, temperature, media, flange standard and gasket drawing.
Haifeng Rubber supplies reinforced sheet, rings, flange gaskets and drawing-based parts after construction and test requirements are agreed.
Key Features
- Embedded metal mesh reinforcement
- Improved dimensional stability
- Resistance to extrusion under controlled clamping
- Multiple rubber and mesh combinations
- Sheets and finished cut gaskets
- Construction reviewed for pressure, media and flange design
Applications
- Industrial flange gaskets
- Heat exchanger and equipment joints
- Process piping connections
- Tank and vessel covers
- Compressor and pump assemblies
- Custom reinforced sealing parts
Specifications
| Thickness | 1mm to 10mm typical; construction-dependent |
|---|---|
| Width | Sheet width and cut sizes by mesh and production capability |
| Length | Sheets, rolls where feasible, or finished cut gaskets |
| Hardness | 60 Shore A, depending on grade |
| Color | Black standard; other colors by compound |
| Density | 1.5g/cm³ |
| Surface | Smooth or fabric-impression finish |
| Packaging | Export-wrapped rolls, cartons or pallet packing |
Customization Available
These options can be adjusted after the required application and order specification are confirmed.
- Rubber compound and performance targets
- Thickness, width and roll length
- Shore A hardness and color
- Smooth, fabric-impression or specified surface
- Full rolls, cut sheets and drawing-based parts
- Test reports, batch marking and export packaging
Frequently Asked Questions
Why is wire mesh inserted into rubber?
The mesh limits stretch and helps the gasket resist deformation and extrusion under clamping.
Which mesh metals are available?
Steel and stainless-steel options can be reviewed according to corrosion and temperature needs.
Does reinforcement define the pressure rating?
No. Pressure capability depends on the complete gasket construction, flange, bolts, media and temperature.
Can different rubber compounds be used?
Yes. NBR, EPDM, CR and other compounds can be reviewed for the service environment.
Can finished flange gaskets be supplied?
Yes. Send a drawing or flange standard with dimensions and tolerances.
What is needed for an RFQ?
Provide compound, mesh, thickness, pressure, temperature, media, flange details, dimensions and quantity.