Product Overview
Natural Rubber Sheet also called NR rubber sheet, is selected for high elasticity, rebound and abrasion resistance in dry industrial service.
Natural rubber performs well under repeated flexing and mechanical wear, but it is generally not recommended for petroleum oils, fuels, ozone-rich outdoor exposure or sustained high temperatures.
Specify hardness, tensile and elongation targets, abrasion requirement, temperature, contact media and whether the application is indoors or outdoors.
Haifeng Rubber supplies NR sheet in rolls, cut lengths, strips and fabricated wear parts, with compound properties confirmed against the agreed data sheet.
Key Features
- High elasticity and rebound
- Good abrasion resistance in dry service
- Flexible under repeated deformation
- Multiple hardness and thickness options
- Rolls, sheets and cut parts
- Mechanical properties confirmed by test method
Applications
- Wear liners and abrasion pads
- Gaskets for non-oil service
- Vibration and impact pads
- Chute and equipment lining
- Scraper blades and flexible parts
- General rubber conversion
Specifications
| Thickness | 1mm to 50mm; range depends on compound and width |
|---|---|
| Width | 1000mm, 1200mm, 1500mm and 2000 mm by grade |
| Length | 5m, 10m or 20m rolls; cut lengths available |
| Hardness | 40 to 80 Shore A, depending on grade |
| Color | Black standard; other colors by compound |
| Density | Confirmed according to the selected compound and specification |
| Temperature Range | Typical -40°C to +70°C; confirm by compound and service |
| Surface | Smooth or fabric-impression finish |
| Packaging | Export-wrapped rolls, cartons or pallet packing |
Customization Available
These options can be adjusted after the required application and order specification are confirmed.
- Rubber compound and performance targets
- Thickness, width and roll length
- Shore A hardness and color
- Smooth, fabric-impression or specified surface
- Full rolls, cut sheets and drawing-based parts
- Test reports, batch marking and export packaging
Frequently Asked Questions
What is natural rubber sheet best suited for?
It is commonly selected for elasticity, rebound and abrasion resistance in dry mechanical applications.
Is NR rubber sheet oil resistant?
It has limited resistance to petroleum oils and fuels; NBR or another compatible compound is normally preferred.
Can it be used outdoors?
Natural rubber has limited ozone and weathering resistance unless specially protected, so exposure conditions must be reviewed.
Which hardness is available?
Common options range from about 40 to 80 Shore A, depending on thickness and formulation.
Can it be supplied as cut wear parts?
Yes. Rolls can be converted into pads, liners, strips and drawing-based parts.
What data is required for a quotation?
Provide hardness, thickness, width, length, mechanical targets, contact media, temperature and quantity.