Product Overview
FDA Rubber Sheet refers to rubber sheet made from a compound selected for applicable food-contact requirements, rather than a single rubber material.
Silicone, EPDM, NBR and other elastomers may be used depending on food type, temperature, cleaning chemicals and fat or oil exposure. Compliance belongs to the specific formulation and supporting documents.
State the destination market, applicable regulation, food type, contact duration, temperature, cleaning cycle and required declaration or test report.
Haifeng Rubber supplies documented food-contact sheet in rolls and cut parts after the compound, color and compliance scope are approved.
Key Features
- Food-contact compounds selected by application
- Silicone, EPDM and NBR options
- Colors suited to hygienic processing areas
- Rolls, sheets and cut gaskets
- Documentation tied to the exact compound
- Cleaning and temperature compatibility reviewed before production
Applications
- Food-processing equipment gaskets
- Beverage and dairy machinery
- Bakery and packaging equipment
- Hygienic conveyor and sealing parts
- Kitchen and catering equipment
- Custom food-contact rubber components
Specifications
| Thickness | 1mm to 50mm; range depends on compound and width |
|---|---|
| Width | 1000mm, 1200mm, 1500mm and 2000 mm by grade |
| Length | 5m, 10m or 20m rolls; cut lengths available |
| Hardness | 40 to 80 Shore A, depending on grade |
| Color | White, translucent, blue, red or other approved color by compound |
| Density | Confirmed according to the selected compound and specification |
| Temperature Range | Material-dependent; confirm against the approved food-contact grade |
| Surface | Smooth or fabric-impression finish |
| Packaging | Export-wrapped rolls, cartons or pallet packing |
Customization Available
These options can be adjusted after the required application and order specification are confirmed.
- Rubber compound and performance targets
- Thickness, width and roll length
- Shore A hardness and color
- Smooth, fabric-impression or specified surface
- Full rolls, cut sheets and drawing-based parts
- Test reports, batch marking and export packaging
Frequently Asked Questions
Does the FDA approve rubber sheet products?
FDA rules define requirements for materials and ingredients; compliance must be supported for the specific compound and intended use.
Which rubber is best for food contact?
The choice depends on temperature, fats, oils, cleaning chemicals and mechanical needs.
Is every white rubber sheet food grade?
No. Color is not evidence of compliance; documentation for the exact formulation is required.
Can a declaration of compliance be supplied?
Yes, when agreed for a documented compound and defined regulation.
Can food-grade sheet be die cut?
Yes. Rolls can be converted into seals, pads and equipment gaskets.
What should a food-industry buyer provide?
State the regulation, food type, temperature, contact time, cleaning chemicals, dimensions and quantity.