Skip to content
Request A Quote RFQ

Sponge Rubber Sheet

Open-cell and closed-cell sponge rubber sheet supplied in rolls, adhesive-backed sheets, sealing strips, pads and custom-cut parts.

Request Quote WhatsApp

Product Overview

Sponge rubber sheet is a lightweight cellular elastomer that compresses more easily than solid rubber sheet. It is used for sealing, cushioning, gap filling, insulation, vibration control and protective padding.

The two main structures are closed-cell and open-cell sponge. Closed-cell sponge contains mostly enclosed cells and is commonly selected for enclosure seals, weather strips and applications where reduced water and air transmission is required. Open-cell sponge contains interconnected cells and is more suitable for soft cushioning, airflow and sound absorption.

Sponge rubber can be produced from EPDM, CR neoprene, NBR and other elastomer compounds. The correct material depends on outdoor exposure, oil contact, temperature, compression, water resistance and required service life. Haifeng Rubber supplies sponge rubber in rolls, sheets, strips, adhesive-backed material and custom-cut parts.

Key Features

  • Lower density and easier compression than solid rubber sheet
  • Closed-cell and open-cell structures available by application review
  • EPDM, CR neoprene, NBR and other base polymers available
  • Suitable for sealing, cushioning, insulation and vibration control
  • Optional pressure-sensitive adhesive backing and release liner
  • Can be slit, laminated or die-cut into custom shapes

Applications

  • Electrical and mechanical enclosure seals
  • Door, window and access-panel sealing strips
  • HVAC equipment and ductwork seals
  • Automotive and transportation components
  • Cushioning pads and protective spacers
  • Vibration and noise-control components
  • Thermal insulation and gap-filling strips
  • Custom-cut gaskets for low-pressure applications

Specifications

Thickness1mm/2mm/3mm/4mm/5mm/6mm/8mm/or custom
Width1000 mm, 1200 mm, 1400 mm, 1500 mm and 2000 mm
Length10 m rolls or custom
Hardness40 ±5, 50 ±5, 60 ±5, 70 ±5 and 80 ±5 Shore A
ColorBlack, gray, red, blue, white or custom color
Density1.8g/cm³, 1.7g/cm³, 1.6g/cm³, 1.5g/cm³, 1.4g/cm³
SurfaceDense raised small round-stud pattern
Fabric InsertionOne or multiple plies available by thickness and application review
PackagingExport-wrapped rolls, cut sheets or pallet packing

Customization Available

These options can be adjusted after the required application and order specification are confirmed.

  • Open-cell, closed-cell or semi-closed-cell construction
  • EPDM, CR neoprene, NBR or specified base polymer
  • Thickness, width, roll length and density
  • Soft, medium or firm compression grade
  • Natural skin or skived surface
  • One-side or two-side adhesive lamination
  • Slit rolls, continuous sealing strips and pads
  • Die-cut gaskets and parts made from drawings
  • Release liner, custom packaging and private labeling

Frequently Asked Questions

What is sponge rubber sheet?

Sponge rubber sheet is an expanded cellular rubber material that is lighter and more compressible than solid rubber sheet. It is used for sealing, cushioning, insulation, vibration control and gap filling.

What is the difference between open-cell and closed-cell sponge rubber?

Open-cell sponge has interconnected cells and is generally softer, more breathable and suitable for cushioning or sound absorption. Closed-cell sponge has mostly enclosed cells and is generally better for environmental sealing and reduced water absorption.

Is sponge rubber the same as solid rubber sheet?

No. Solid rubber has a dense structure and normally requires more force to compress. Sponge rubber contains cells that reduce its density and allow it to conform more easily to gaps and uneven surfaces.

Is closed-cell sponge rubber waterproof?

Closed-cell sponge normally absorbs much less water than open-cell material, but a finished seal is not automatically waterproof. Cell structure, compression, joints, adhesive and installation design all affect sealing performance.

Which sponge rubber material is best for outdoor use?

EPDM sponge is commonly selected for ozone, UV and outdoor weather exposure. The exact grade should be confirmed according to temperature, compression and expected service life.

Which sponge rubber material is suitable for oil contact?

NBR sponge may be suitable for compatible oils and greases. The specific fluid, temperature and exposure time must be reviewed before selecting the grade.

What is CR neoprene sponge used for?

CR sponge provides a balanced combination of weather, ozone and moderate oil resistance. It is commonly used for industrial seals, cushioning pads and equipment components.

How is sponge rubber firmness specified?

Sponge rubber is better specified by density and compression-deflection or compression-force data than by Shore A hardness alone. Send the required compression and sealing conditions for grade selection.

Can adhesive backing be added?

Yes. One-side or two-side pressure-sensitive adhesive can be laminated to the material. The adhesive must be selected according to the substrate, temperature and exposure conditions.

Can sponge rubber sheet be die-cut into gaskets?

Yes. Sponge sheet can be slit into strips or die-cut into gaskets, pads, washers and custom shapes from confirmed drawings.

Ready to Quote This Rubber Sheet?

Add this product to your RFQ list or send material, size and quantity now.

WhatsApp Email RFQ Top
WhatsApp RFQ