Product Overview
Flame Retardant Silicone Sheet is formulated to reduce flame spread and support specified fire-performance requirements in electrical and industrial assemblies.
Flame behavior depends on the compound, sheet thickness, test method and finished-part design. A generic claim such as fireproof is not appropriate; the required rating must be tied to a specific tested grade.
Provide the exact flame test or rating, minimum thickness, color, hardness, temperature and smoke or toxicity requirements. Documentation should be agreed before the order is released.
Haifeng Rubber supplies rolls, sheets, strips and cut gaskets from flame-retardant silicone grades approved for the stated specification.
Key Features
- Flame-retardant silicone compound
- Temperature-resistant flexible construction
- Ratings tied to a defined test and thickness
- Custom hardness, color and dimensions
- Rolls, sheets, strips and cut gaskets
- Test documentation available by agreement
Applications
- Electrical cabinet seals
- Battery and power-system insulation parts
- Rail and transport equipment
- Lighting and appliance gaskets
- HVAC and ventilation equipment
- Heat-resistant protective components
Specifications
| Thickness | 0.5mm to 20mm; other gauges by production review |
|---|---|
| Width | 1000mm and 1200mm standard; custom widths by review |
| Length | 10m or 20m rolls; sheets and cut lengths available |
| Hardness | 40 to 80 Shore A, depending on grade |
| Color | Translucent, white, red, black or custom color |
| Density | 1.25g/cm³ |
| Temperature Range | Typical silicone service range -60°C to +230°C; confirm the selected grade |
| Surface | Smooth, matte or specified finish |
| Packaging | Export-wrapped rolls, cartons or pallet packing |
Customization Available
These options can be adjusted after the required application and order specification are confirmed.
- Thickness, width and roll length
- Shore A hardness and silicone grade
- Color matching from an approved reference
- Surface finish and release liner
- Rolls, sheets, strips and drawing-based parts
- Batch identification, test report and export packaging
Frequently Asked Questions
Is flame-retardant silicone fireproof?
No. It is formulated to meet a defined flame test under specified conditions, not to remain unaffected by fire.
Which flame ratings are available?
Options such as UL 94 grades can be reviewed, but the exact rating and tested thickness must be confirmed.
Does sheet thickness affect the rating?
Yes. A rating may apply only at or above a specific tested thickness.
Can custom colors be supplied?
Yes, although pigments can affect formulation and the final tested grade must be confirmed.
Can you provide test documentation?
Documentation can be supplied when agreed for the selected compound, thickness and standard.
What must be included in the inquiry?
State the flame standard and rating, thickness, hardness, color, dimensions, temperature and quantity.