Product Overview
Frosted Silicone Sheet has a matte, low-gloss surface that reduces tack and gives fabricated parts a clean, uniform appearance.
The frosted finish can make sheet easier to handle and less visually reflective than a smooth glossy surface. It does not by itself change the underlying silicone grade, so heat, hardness and compliance still depend on the compound.
Specify whether one or both sides require the matte finish, along with color, transparency, thickness, hardness and service conditions. Surface appearance should be approved from a representative sample.
Haifeng Rubber supplies frosted silicone in rolls, cut sheets, strips and fabricated parts for sealing, lining and protective applications.
Key Features
- Low-gloss frosted surface
- Reduced surface tack for easier handling
- One-side or two-side matte finish
- Custom colors and transparency levels
- Rolls, sheets and converted parts
- Silicone grade selected separately from surface texture
Applications
- Visible gaskets and seals
- Protective liners and covers
- Electrical insulation components
- Appliance and equipment trim
- Color-coded fabricated parts
- Custom silicone pads and strips
Specifications
| Thickness | 0.5mm to 20mm; other gauges by production review |
|---|---|
| Width | 1000mm and 1200mm standard; custom widths by review |
| Length | 10m or 20m rolls; sheets and cut lengths available |
| Hardness | 40 to 80 Shore A, depending on grade |
| Color | Translucent, white, red, black or custom color |
| Density | 1.25g/cm³ |
| Temperature Range | Typical silicone service range -60°C to +230°C; confirm the selected grade |
| Surface | One-side or two-side frosted matte finish |
| Packaging | Export-wrapped rolls, cartons or pallet packing |
Customization Available
These options can be adjusted after the required application and order specification are confirmed.
- Thickness, width and roll length
- Shore A hardness and silicone grade
- Color matching from an approved reference
- Surface finish and release liner
- Rolls, sheets, strips and drawing-based parts
- Batch identification, test report and export packaging
Frequently Asked Questions
What does frosted silicone sheet mean?
It describes a matte surface texture with lower gloss than standard smooth silicone sheet.
Is the frosted finish available on both sides?
Yes. One-side and two-side frosted finishes can be reviewed.
Does the matte surface improve heat resistance?
No. Temperature capability comes from the silicone compound, not the surface texture.
Can translucent frosted sheet be supplied?
Yes, subject to thickness, pigment and the required level of transparency.
Can it be cut into finished parts?
Yes. Rolls can be slit or converted into sheets, pads, strips and gaskets.
What should a buyer specify?
Provide surface sides, color, transparency, thickness, hardness, dimensions, quantity and silicone grade.