Product Overview
High Tear Resistance Silicone Rubber Sheet uses a reinforced silicone formulation for parts that are repeatedly flexed, stretched or handled during assembly.
Compared with general commercial silicone, a high-tear grade is designed to resist the growth of cuts and edge damage. Actual tear strength varies with hardness, cure system, sheet thickness, temperature and test method.
State the required tear test method and minimum value, along with tensile strength, elongation, hardness, temperature and regulatory needs. A data sheet or sample should be approved before production.
Haifeng Rubber supplies rolls, cut sheets, membranes and precision-cut parts from selected high-tear silicone compounds.
Key Features
- Higher tear resistance than general commercial silicone
- Flexible performance across a broad temperature range
- Custom hardness and thickness
- Smooth and matte surface options
- Rolls, sheets and precision-cut components
- Test values confirmed to an agreed method
Applications
- Flexible membranes and diaphragms
- Repeatedly handled seals
- Vacuum forming membranes
- Protective covers and bellows
- High-temperature gasket parts
- Custom silicone components with thin edges
Specifications
| Thickness | 0.5mm to 20mm; other gauges by production review |
|---|---|
| Width | 1000mm and 1200mm standard; custom widths by review |
| Length | 10m or 20m rolls; sheets and cut lengths available |
| Hardness | 40 to 80 Shore A, depending on grade |
| Color | Translucent, white, red, black or custom color |
| Density | 1.25g/cm³ |
| Temperature Range | Typical silicone service range -60°C to +230°C; confirm the selected grade |
| Surface | Smooth, matte or specified finish |
| Packaging | Export-wrapped rolls, cartons or pallet packing |
Customization Available
These options can be adjusted after the required application and order specification are confirmed.
- Thickness, width and roll length
- Shore A hardness and silicone grade
- Color matching from an approved reference
- Surface finish and release liner
- Rolls, sheets, strips and drawing-based parts
- Batch identification, test report and export packaging
Frequently Asked Questions
What makes this grade tear resistant?
The compound is formulated to slow the growth of cuts and edge damage under deformation.
Is high tear strength the same as high tensile strength?
No. Tear and tensile properties use different tests and should be specified separately.
Which tear test method is used?
The method and specimen type must be agreed because different standards can give different values.
Can thin sheets be supplied?
Yes, subject to the compound, width and thickness tolerance required.
Can the material be used for diaphragms?
It is often selected for flexible diaphragms, but pressure, stroke, thickness and service life must be reviewed.
What should be supplied with an RFQ?
State the test method and minimum values, hardness, thickness, dimensions, temperature, color and quantity.