Product Overview
Foamed Silicone Sheet is a lightweight, compressible silicone material used where a solid sheet would be too firm to follow surface irregularities.
Its cellular structure provides cushioning, thermal stability and controlled compression. Density, cell structure and compression-deflection values should be chosen from the application rather than from thickness alone.
State the required thickness, density, compression at deflection, recovery, temperature range and sealing environment. Water sealing depends on grade, compression level and joint design.
Haifeng Rubber supplies foam rolls, cut sheets, strips and converted gaskets, with optional adhesive backing after substrate review.
Key Features
- Lightweight cellular silicone construction
- Soft compression for uneven joints
- Temperature-resistant sealing performance
- Closed-cell grades available
- Optional pressure-sensitive adhesive
- Rolls, sheets, strips and die-cut parts
Applications
- Enclosure and cabinet seals
- Lighting and electronics gaskets
- Thermal equipment insulation
- Appliance and oven seals
- Cushioning and gap filling
- Custom foam gasket conversion
Specifications
| Thickness | 0.5mm to 20mm; other gauges by production review |
|---|---|
| Width | 1000mm and 1200mm standard; custom widths by review |
| Length | 10m or 20m rolls; sheets and cut lengths available |
| Hardness | 30 to 80 Shore A, depending on grade |
| Color | Translucent, white, red, black or custom color |
| Density | 0.9g/cm³ |
| Temperature Range | Typical silicone service range -60°C to +230°C; confirm the selected grade |
| Surface | Closed-cell foam surface; adhesive backing optional |
| Packaging | Export-wrapped rolls, cartons or pallet packing |
Customization Available
These options can be adjusted after the required application and order specification are confirmed.
- Thickness, width and roll length
- Shore A hardness and silicone grade
- Color matching from an approved reference
- Surface finish and release liner
- Rolls, sheets, strips and drawing-based parts
- Batch identification, test report and export packaging
Frequently Asked Questions
How is silicone foam different from solid silicone sheet?
Foam is lighter and more compressible, while solid sheet provides higher mechanical strength and a denser sealing surface.
Is foamed silicone waterproof?
Closed-cell grades can resist water entry, but sealing depends on compression, joints and installation.
How should density be selected?
Use the required compression force, recovery and sealing pressure rather than choosing density by appearance.
Can adhesive backing be added?
Yes. The adhesive must be matched to the substrate and operating temperature.
Can it be cut into gasket frames?
Yes. Sheets can be slit, die cut or waterjet cut depending on thickness and tolerance.
What data should buyers provide?
State thickness, density, compression need, temperature, dimensions, quantity and any adhesive or compliance requirement.