Product Overview
The adhesive normally assists assembly; it should not automatically be treated as the only structural attachment.
Temperature capability is limited by the lowest-rated component, often the PSA or release liner rather than the silicone sponge.
Substrate material, surface energy, contamination, load and dwell time affect adhesion.
Never advertise the base silicone temperature as the finished adhesive laminate’s rating without PSA data.
Key Features
- Closed-cell silicone foam construction
- Single-side pressure-sensitive adhesive
- Wide temperature capability by grade
- Conforms to uneven sealing surfaces
- Rolls, sheets, strips and die-cut gaskets
- Adhesive and release liner selected for the substrate
Applications
- Electrical enclosure gaskets
- Lighting and HVAC seals
- Battery and electronics cushioning
- Oven and appliance seals
- Vibration isolation pads
- Assembly positioning strips
Specifications
| Thickness | 0.5mm to 20mm; other gauges by production review |
|---|---|
| Width | 1000mm and 1200mm standard; custom widths by review |
| Length | 10m or 20m rolls; sheets and cut lengths available |
| Hardness | 30 to 80 Shore A, depending on grade |
| Color | Translucent, white, red, black or custom color |
| Density | Foam density and compression properties confirmed by grade |
| Temperature Range | Typical silicone service range -60°C to +230°C; confirm the selected grade |
| Surface | Closed-cell foam surface with release liner |
| Packaging | Export-wrapped rolls, cartons or pallet packing |
Customization Available
These options can be adjusted after the required application and order specification are confirmed.
- Thickness, width and roll length
- Shore A hardness and silicone grade
- Color matching from an approved reference
- Surface finish and release liner
- Rolls, sheets, strips and drawing-based parts
- Batch identification, test report and export packaging
Frequently Asked Questions
What is the adhesive used for?
It helps position the foam during assembly, but it should not automatically be treated as the only mechanical fixing.
Will the adhesive bond to every surface?
No. Bond performance depends on the substrate, cleanliness, temperature and pressure, so application testing is recommended.
Is the foam open cell or closed cell?
Closed-cell silicone foam is the normal option for sealing; the exact cell structure is confirmed by grade.
Can both sides have adhesive?
Double-sided adhesive constructions can be reviewed against the application and required liner.
Can you die cut custom gaskets?
Yes. Drawings can be used for strips, pads, frames and other converted parts.
What information is needed for selection?
Provide thickness, density or compression need, temperature, substrate, adhesive requirement, dimensions and quantity.