Skip to content
Request A Quote RFQ

Conveyor Skirtboard Rubber

Flexible skirtboard rubber for conveyor loading zones, transfer points and bulk-material handling systems.

Request Quote WhatsApp

Product Overview

Conveyor skirtboard rubber is installed along the sides of a conveyor belt to help contain bulk material at loading and transfer points.
The strip must remain flexible enough to follow belt movement while resisting abrasion from coal, ore, aggregate, grain or other conveyed material. Compound choice therefore depends on particle type, belt speed, contact pressure, temperature and oil exposure.
Haifeng Rubber supplies full-width rolls, slit strips and cut lengths. The skirt should be adjusted against the belt rather than forced into excessive contact, because incorrect pressure can increase belt wear and operating heat.
Skirtboard rubber is a wear component. Service life cannot be stated without the conveyor geometry, adjustment pressure and conveyed material.

Key Features

  • Abrasion-resistant compounds for continuous belt-edge contact
  • Flexible edge that can follow normal belt movement
  • Available as full rolls, slit strips or drilled lengths
  • Straight, bevelled or specified cut edges
  • Fabric reinforcement available where dimensional stability is required
  • Compound selection based on conveyed material and service conditions

Applications

  • Mining and quarry conveyors
  • Cement and aggregate plants
  • Coal and mineral handling
  • Grain and fertilizer conveyors
  • Recycling and waste-processing lines
  • Transfer chutes and loading-zone sealing

Specifications

Thickness1mm/2mm/3mm/4mm/5mm/6mm/8mm/or custom
Width1m/1.2m/1.5m/2m/or custom
Length10 m rolls or custom
Hardness65±5
ColorBlack, gray, red, blue, white or custom color
Density1.5g/cm³
PackagingExport-wrapped rolls, cut sheets or pallet packing

Customization Available

These options can be adjusted after the required application and order specification are confirmed.

  • Strip width and thickness
  • Hardness and abrasion grade
  • Straight or bevelled edge
  • Fabric insertion
  • Pre-drilled mounting holes
  • Custom roll length and export packing

Frequently Asked Questions

What is conveyor skirtboard rubber used for?

It seals the sides of a conveyor loading zone to reduce material spillage and dust escape.

Should the skirt touch the belt?

It is normally adjusted close to or lightly against the belt. Excessive pressure can create heat and accelerate belt wear.

Which rubber is suitable for abrasive material?

An NR/SBR abrasion-resistant compound is common, but the material must be selected against particle type, speed and contact pressure.

Is oil-resistant skirtboard available?

Yes. An NBR-based grade can be reviewed when the conveyed material contains compatible mineral oil or grease.

Can you supply pre-cut strips?

Yes. Provide strip width, thickness, length, hole pattern and required quantity.

Can Haifeng Rubber provide custom sizes and cut parts?

Yes. Provide the required dimensions, tolerances, quantity and drawing so the suitable manufacturing method can be reviewed.

What information should be included in an enquiry?

State the application, operating environment, required properties, dimensions, quantity, applicable test method and documentation needs.

Ready to Quote This Rubber Sheet?

Add this product to your RFQ list or send material, size and quantity now.

WhatsApp Email RFQ Top
WhatsApp RFQ