Skip to content
Request A Quote RFQ

Mining and bulk handling

Rubber Sheet for Mining and Conveyor Systems

Conveyor skirting, wear liners and cut rubber parts for mines, quarries and bulk-material transfer points.

Rubber Materials for Mining Conveyors

Mining, quarrying and aggregate operations move bulk materials through conveyor loading zones and transfer points. Rubber skirting is used along belt edges at the load zone, while cut rubber liners and pads can be specified for areas exposed to contact and wear. Selection depends on the conveyed material, abrasion, impact, moisture, oil exposure and how the part is mounted.

Haifeng supplies Conveyor Skirtboard Rubber in rolls, slit strips and cut lengths. For other equipment parts, buyers can compare natural rubber sheet, SBR sheet, polyurethane sheet and fabric-reinforced rubber according to the duty. Fabric reinforcement can improve dimensional stability in a suitable design, but the material and construction should be chosen for the actual wear location.

Send us the installation position, dimensions or drawing, belt width and speed where relevant, material handled, expected wear condition and quantity. We can then review the rubber format and compound for a quotation.

Belt conveyor carrying dark bulk material beside stockpiles at a mining stockyard
Bulk-material conveyor at a mining stockyard
Outdoor belt conveyor on idler rollers with bulk-material stockpiles in the background
Mining conveyor line and idler rollers
Coiled black rubber sheet rolls for conveyor skirting and cut parts
Rubber sheet rolls for conveyor skirting
Cloth inserted rubber mat showing reinforced layers
Fabric-reinforced rubber sheet construction

Information for Your Inquiry

  1. Position: belt skirting, transfer chute, liner or protective pad
  2. Material handled, belt width and speed, abrasion and impact conditions
  3. Drawing or sample, thickness, width, length and fixing details
  4. Required roll, strip or cut format and quantity
Products to compareConveyor Skirtboard Rubber is the starting point for belt-edge sealing. Compare natural rubber, SBR, polyurethane or fabric-reinforced sheet for liners and pads only after the wear position and service conditions are confirmed.
Quotation processShare the conveyor location, handled material, dimensions or drawing, quantity and any target hardness or wear specification. We will review the suitable rubber construction and quote the requested roll or cut-part format.

Mining Conveyor Rubber Questions

What is conveyor skirtboard rubber used for?

Skirting is installed beside the belt at loading and transfer areas to help contain conveyed material. Its performance also depends on the chute, belt support and installation.

Which rubber sheet is suitable for a wear liner or pad?

The answer depends on the handled material, abrasion or impact pattern, moisture or oil exposure, mounting method and dimensions. Send the duty details so natural rubber, SBR, polyurethane or reinforced construction can be compared.

Can you supply cut strips and parts instead of full rolls?

Yes. Send a drawing or sample with the strip width, thickness, length, edge or hole details and quantity for review.

Request a Mining Conveyor Rubber Quote

Request A Quote
WhatsApp Email RFQ Top
WhatsApp RFQ